Step 1: Raise rear spoiler (button located on center console).

Step 2: Open engine cover (switch located on drivers side kick plate).

Step 3: Pop off center plastic engine cover (held in place by rubber grommets).

Step 4: Pop off both right and left side plastic shroud covers (right side needs to have oil and coolant caps removed prior).

Step 5: Locate the 2 screws (T25) per taillight and remove (located just under the rear spoiler).

Step 6: With a panel pry tool, pry from the front most bottom portion it the taillight towards you and slide the taillight straight out. “Do Not” turn the light side to side in removal (taping the paint prior to prying may save from any potential damage while prying).

Step 7: Unclip taillight from wire harness and you are complete!