EYE OF THE KIGER

Note: Perform at your own risk. Tools Needed: 1. T30 Torx Bit 2. T20 Torx Bit 3. Ratchet Wrench (to accept T20 Bit) (Thin Ratchet) 4. ...

Perform at your own risk Tools Needed: 1. Small Ratchet 2. 8mm Socket 3. T30 Torx 4. Flat Head Screwdriver 5. Panel pry tool 6. Jack 7....

Note: Perform at your own risk. All Photos Property of Tony Kiger Tools needed: 1. Phillips Head Screwdriver First, start by opening the...

Note: Perform at your own risk. Porsche 911 "992" interior triangle is fixed to the door panel. Do not try to remove. Tools Needed: 1. ...

Revision: 3/8/2020 Note: Perform at your own risk. Tools Needed: 1. T30 Torx Bit 2. Ratchet Wrench (to accept T30 Bit) 3. Slim Panel...

Note: Perform at your own risk. Before starting the door panel removal, ensure that you have a slim panel pry tool, as well as a T30 torx...

Note: Perform at your own risk. All Photos Property of Tony Kiger Displayed above you will notice that the "992" has a trim cover over...

Note: Perform at your own risk. Starting with passengers side mirror: First, open passengers side door for access of inner door panel....

Note: Perform at your own risk. If you are able to raise the rear end and remove both rear wheels, this will make the process much...

Note: Perform at your own risk. The steps to follow will explain how to easily remove the exterior door handles on a 2018-present Jeep...

Keep in mind, this 2015 GMC Sierra has fender flares, so the instructions may vary a little. First start by opening the hood. Once the...

Step 1: Open rear engine hatch Step 2: Locate carbon fiber cover on underside of engine hatch. Step 3: Remove “12” T20 screws holding the...

Step 1: Start by taping off beneath the taillight and at the front most corner of the light. This will ensure no damage to the paint...

Step 1: Raise rear spoiler (button located on center console). Step 2: Open engine cover (switch located on drivers side kick plate)....