EYE OF THE KIGER

Note: Perform at your own risk. Tools Needed: 1. T30 Torx Bit 2. T20 Torx Bit 3. Ratchet Wrench (to accept T20 Bit) (Thin Ratchet) 4. ...

Note: Perform at your own risk. All Photos Property of Tony Kiger Tools needed: 1. Phillips Head Screwdriver First, start by opening the...

Note: Perform at your own risk. Tools Needed: 1. Panel Pry tool 2. 17mm Socket 3. Impact or breaker bar 4. T40 Bit 5. Ratchet Wrench (to...

Note: Perform at your own risk. Porsche 911 "992" interior triangle is fixed to the door panel. Do not try to remove. Tools Needed: 1. ...

Revision: 3/8/2020 Note: Perform at your own risk. Tools Needed: 1. T30 Torx Bit 2. Ratchet Wrench (to accept T30 Bit) 3. Slim Panel...

Note: Perform at your own risk. Before starting the door panel removal, ensure that you have a slim panel pry tool, as well as a T30 torx...

Note: Perform at your own risk. All Photos Property of Tony Kiger Displayed above you will notice that the "992" has a trim cover over...

Note: Perform at your own risk. Starting with passengers side mirror: First, open passengers side door for access of inner door panel....

Note: Perform at your own risk. If you are able to raise the rear end and remove both rear wheels, this will make the process much...

Note: Perform at your own risk. The steps to follow will explain how to easily remove the exterior door handles on a 2018-present Jeep...

Note: This is not recommended for anyone without proper experience. Perform at your own risk. First we will start by opening the hood....

Keep in mind, this 2015 GMC Sierra has fender flares, so the instructions may vary a little. First start by opening the hood. Once the...

Below is a link to Rupes USA interactive parts page for the LHR75E For warranty support: https://rupesusa.com/repairs/ Notice: This guide...

Pictorial by: Tony Kiger For Rupes Nano parts: https://rupesusa.com/wp-content/uploads/2018/03/HR81L-HR81ML-interactive-parts-diagram201...

Step 1: Open rear engine hatch Step 2: Locate carbon fiber cover on underside of engine hatch. Step 3: Remove “12” T20 screws holding the...

Step 1: Start by taping off beneath the taillight and at the front most corner of the light. This will ensure no damage to the paint...

Step 1: Raise rear spoiler (button located on center console). Step 2: Open engine cover (switch located on drivers side kick plate)....