EYE OF THE KIGER

Step 1: Open rear trunk hatch. Step 2: Locate the plastic taillight shroud cover and pop it off (held in by plastic tabs, just pulls...

Step 1: Open rear engine hatch Step 2: Locate carbon fiber cover on underside of engine hatch. Step 3: Remove “12” T20 screws holding the...

Step 1: Start by taping off beneath the taillight and at the front most corner of the light. This will ensure no damage to the paint...

Step 1: Lift Vehicle from front lift points (dedicated lift preferred over a floor jack). Step 2 : Open Hood. Step 3: Remove front...

Step 1: Raise rear spoiler (button located on center console). Step 2: Open engine cover (switch located on drivers side kick plate)....

TONY KIGER· When it comes to restoring a vintage vehicle key notes should be taken along with care of fragile and irreplaceable pieces...