EYE OF THE KIGER

Note: Perform at your own risk. Tools Needed: 1. T30 Torx Bit 2. Ratchet Wrench (to accept T30 Bit) All Photos Property of Tony Kiger...

Note: Perform at your own risk. Tools Needed: 1. T30 Torx Bit 2. T20 Torx Bit 3. Ratchet Wrench (to accept T20 Bit) (Thin Ratchet) 4. ...

Note: Perform at your own risk. Porsche 911 "992" interior triangle is fixed to the door panel. Do not try to remove. Tools Needed: 1. ...

Revision: 3/8/2020 Note: Perform at your own risk. Tools Needed: 1. T30 Torx Bit 2. Ratchet Wrench (to accept T30 Bit) 3. Slim Panel...

Note: Perform at your own risk. Before starting the door panel removal, ensure that you have a slim panel pry tool, as well as a T30 torx...

Note: Perform at your own risk. All Photos Property of Tony Kiger Displayed above you will notice that the "992" has a trim cover over...

Note: Perform at your own risk. If you are able to raise the rear end and remove both rear wheels, this will make the process much...

Note: Perform at your own risk To remove the front fender vents you will need: -3M Double Sided Automotive Tape -3M Painters Tape...

Listed below will follow directions on how to remove the double fixed wing on a 2016+ Porsche 911 Carrera GTS Start by releasing the...

Step 1: Open rear engine hatch Step 2: Locate carbon fiber cover on underside of engine hatch. Step 3: Remove “12” T20 screws holding the...

Step 1: Start by taping off beneath the taillight and at the front most corner of the light. This will ensure no damage to the paint...

Step 1: Raise rear spoiler (button located on center console). Step 2: Open engine cover (switch located on drivers side kick plate)....